Posted on August 11, 2009 at 1:20 pm

PyGRUB foiled by newer mke2fs

So a buddy of mine about a week ago decides to put together a machine whose software setup is similar to the machine which runs DotBlag here.  Solaris or OpenSolaris, running Debian inside of a Paravirtualized Machine under Xen (xVM in Solaris). This process sucks a little bit because unlike everyone else Debian still doesn’t […]

Posted on October 2, 2008 at 11:05 pm

ZFS In Action

Well we’ve now had a few months of full production ZFS usage. We’ve had our first drive failure which exposed the oddities of drive failures under ZFS. It does work REALLY hard to cover them up, so much so that it never really quite gave up on the dead drive until I ran zpool offline […]

  • Comments Off on ZFS In Action
  • .Fail
  • by SysOp

Posted on August 19, 2008 at 9:16 am

New server coming!

Well, the box running dotblag.com, while plenty serviceable, is showing it’s age.  I’ve ordered a pretty large machine (just short of $3000 in total parts) and the bits are on their way, woohoo!  I’ll be setting it up and burning it in over the next month or two.  Once it’s ready dotblag will be moving […]

Posted on July 25, 2008 at 5:26 pm

Goodbye Areca, Hello LSI

While it’s not clear exactly who-is-causing what, what is clear is the areca driver tries to de-reference a NULL pointer, this is either because the adapter screws up, or the driver screws up somewhere. The result is a Solaris kernel fault, pointing at the arcmsr driver, and apparently an adapter lockup.  It’s not 100% clear […]

Posted on February 7, 2008 at 1:57 am

RAID, no, not the insecticide, though there is a bug here.

Areca ARC-1280 (and ARC-1280ML’s, same product, different connector) have 24 SATA ports.  But only support 16 drives in JBOD mode….or in any mode really, 16 drives exposed to the host is maximum.  The controller deadlocks during POST/INIT if you have 17+ drives when it’s set to JBOD mode.  So you can have 12 LUNs 2 […]