Robert Galvin was the CEO of Motorola. Motorola almost single handedly developed a huge amount of the wireless technology we all take for granted. They certainly had no small amount of help from Bell labs (where Ritchie worked).

We’re rapidly losing the men and women who helped us create our modern technological society. Who shaped our current world in ways that most will never even begin to understand, and that no one could fully comprehend. Let us hope that we can continue that legacy.

Performance Summary
*******************

Worst slack in design: 0.089

                                  Requested     Estimated     Requested     Estimated               Clock        Clock
Starting Clock                    Frequency     Frequency     Period        Period        Slack     Type         Group
------------------------------------------------------------------------------------------------------------------------------------
main_pll|CLKOP_inferred_clock     130.0 MHz     131.5 MHz     7.692         7.603         0.089     inferred     Inferred_clkgroup_0
System                            130.0 MHz     719.4 MHz     7.692         1.390         6.302     system       system_clkgroup
====================================================================================================================================

“To coin Money, regulate the Value thereof, and of foreign Coin, and fix the Standard of Weights and Measures;”

OK so it says the government can make money, and assign some sort of value to it, and to foreign Coin (Bitcoin == foreign coin here), and set standards of weights and measure.  That which is not expressly allowed is forbidden is a basic foundation of our law when it comes to US Government, the opposite is true of the common citizen, anything which is not expressly forbidden, is allowed, providing for our freedoms.  So there is NO basis that the US Government can hinder bitcoin, or much of any other legal trade/commerce using ANY alternate form of valuation (barter, Visa cards, stored value credit cards, tokens in arcades, tokens for subways) in the US Constitution, atleast under Art. 1 Sec. 8.

Section. 8.

The Congress shall have Power To lay and collect Taxes, Duties, Imposts and Excises, to pay the Debts and provide for the common Defence and general Welfare of the United States; but all Duties, Imposts and Excises shall be uniform throughout the United States;

To borrow Money on the credit of the United States;

To regulate Commerce with foreign Nations, and among the several States, and with the Indian Tribes;

To establish an uniform Rule of Naturalization, and uniform Laws on the subject of Bankruptcies throughout the United States;

To coin Money, regulate the Value thereof, and of foreign Coin, and fix the Standard of Weights and Measures;

To provide for the Punishment of counterfeiting the Securities and current Coin of the United States;

To establish Post Offices and post Roads;

To promote the Progress of Science and useful Arts, by securing for limited Times to Authors and Inventors the exclusive Right to their respective Writings and Discoveries;

To constitute Tribunals inferior to the supreme Court;

To define and punish Piracies and Felonies committed on the high Seas, and Offences against the Law of Nations;

To declare War, grant Letters of Marque and Reprisal, and make Rules concerning Captures on Land and Water;

To raise and support Armies, but no Appropriation of Money to that Use shall be for a longer Term than two Years;

To provide and maintain a Navy;

To make Rules for the Government and Regulation of the land and naval Forces;

To provide for calling forth the Militia to execute the Laws of the Union, suppress Insurrections and repel Invasions;

To provide for organizing, arming, and disciplining, the Militia, and for governing such Part of them as may be employed in the Service of the United States, reserving to the States respectively, the Appointment of the Officers, and the Authority of training the Militia according to the discipline prescribed by Congress;

To exercise exclusive Legislation in all Cases whatsoever, over such District (not exceeding ten Miles square) as may, by Cession of particular States, and the Acceptance of Congress, become the Seat of the Government of the United States, and to exercise like Authority over all Places purchased by the Consent of the Legislature of the State in which the Same shall be, for the Erection of Forts, Magazines, Arsenals, dock-Yards, and other needful Buildings;–And

To make all Laws which shall be necessary and proper for carrying into Execution the foregoing Powers, and all other Powers vested by this Constitution in the Government of the United States, or in any Department or Officer thereof

Another point, Bitcoin isn’t money laundering.  There’s a trail/trace of every transaction.  Where the money came from, where it went to, who owned it along the way.  Even more easily accessible than a bank record.  So it *IS* traceable, but only to a PRIVATE KEY.  Receiving doesn’t necessarily indicate knowledge though (similar to receiving stolen goods, you can do it knowingly or not).  So how do they map a bitcoin address to a  person, they need your wallet.dat file, thats where the private keys are.  Thats what allows you to spend the coins you receive.  So how do they get those files?  Good old fashioned door busting of course!  Or ISP subpeonas and the like to get data.

Bitcoin just changes the method of tracing cash from dyes and marking and noting serial numbers, to bitcoin addresses/public keys and matching those public keys with held private keys.

Sen. Schumer MAY BE trying to make an argument under the constitution, but in the same way that bartering can be done, and Visa, and others, so can bitcoin.  If he suceeds he can likely only criminalize these other also valid forms of commerce.  I have NOT seen a single sourced article about this though, so it’s all gossip.  Show me on the senates site or similar where he’s doing it and I’ll believe it.

The Hardware

The Ups

First off it’s definitely speedier than the HTC Incredible and it should be!  It also seems to be faster than my netbook, a Dell Mini 9, and the display is certainly larger, clearer than the Mini 9′s.

The Xoom has 1G of memory, but part of that is lost to the display and other things, so the Linux Kernel ends up showing 742MB of RAM.

As to battery life I can’t make any reasonable comparisons WRT battery life against the phone since the Incredible has a bitty itty battery, and the Xoom has a pretty big cell inside of it.  1300 or 1450 mAh stock for the Incredible vs. 3250 mAh for the Xoom, however Seido has a monster 3500 mAh LiIon upgrade for the Incredible, but that requires a different back obviously.  I’ve yet to actually run the battery down to the point where it shuts off.  If I’m using it REALLY heavily then it’ll last a day and a half, maybe more, if it’s mostly sitting idle on my night stand or something it lasts a good week without a plugin.  You definitely seem to get the claimed 10 hours of active/non-standby battery time, unlike the HTC Incredible when it first came out where you were lucky to get 3-4 hrs on standby.

I still don’t yet have 4G, not that there is coverage in Montana at all anyway.  The inbuilt 32GB of storage has been sufficient so I haven’t had need to pop in an SD card yet, though that is supposedly functional now that the first round of software updates came out.

The integrated WiFi is 802.11 a/b/g/n – the 802.11a was great for me when I was in the apartment complex where the 2.4GHz spectrum was basically unusable due to so many APs.

You get a solid front camera rating in at 5MP and a solid rear camera rating in at 2MP — both are video capable, but I haven’t dug into the video capabilities very much.  I’m sure someone, somewhere, has.

It has a HDMI “D” connector, I think they call that microHDMI, I haven’t had a chance to use this yet either, but supposedly it is capable of 720p output.  No idea if it outputs sound or not (it SHOULD!)

And The Downs

*NO* ability to charge from USB on the Xoom.  I’m not even sure if it runs from USB power when it’s plugged in, but it certainly does not charge via USB.  The only charging option is a 12V 1.5A wall-wart (global 100-240V 50/60Hz) with an absolutely tiny diameter barrel connector.  I understand why they went this way, they upped to a 7.4V instead of 3.7V cell, but they could have built in a voltage booster so you could atleast run off USB in a pinch, or charge over a 24 hour period.  The other complaint I have about the charging arrangement is that the connector sticks out from the tablet pretty far when plugged in (see the picture, the USB connector there gives you a sense of size I hope) and is very likely to be broken off.

The touch screen seems to occasionally lose it’s marbles a bit, but I’m not sure if I should blame the touchscreen or the screen protector Verizon sells in their kit.  Locking and then restarting the screen with the power button on the back clears it up.  I’m hoping this is either the screen protector, or, a simple software fix as it is kind of irritating at times.

The “dock” is a useless piece of trash.  It’s almost impossible to get the stupid thing to line up so you can even use it, it only has audio output and charging capability (no USB nor HDMI pass-through).  Changing the “shoe” on the bottom of the Xoom to include some holes for alignment pins would fix this.

New Apps/Features

The new GMail app for Android 3.0 is SO much better than the old for the phones.  The layout it’s using though really requires the extra screen real-estate.

The new browser is faster, and the context bar(?) at the top where it shows your tabs, lets you touch to get the address bar, open new tab, close a tab, etc, is far more intuitive and easy to use than the old browser was.

One of the more interesting new apps I haven’t played much with yet is the Movie Studio app.  This lets you take video and pictures and actually edit together whole sequences right on the Xoom.  It’s actually fairly speedy, probably taking advantage of hardware acceleration to achieve that.

The CNN app that they demo-ed sort of sucks, the stack widget can’t or won’t display anything but Top Stories, the scrolling when you’re reading stories is ALWAYS along the left hand side of the device making reading anything very awkward with the majority of the screen taken up by whatever extra media is associated with the story.  There’s also no way to get to the home screen if you jump into the CNN App from the widget (the back button doesn’t always do it for some reason, sometimes it takes you back to the Android Home screen, sometimes it actually successfully puts you at the CNN App’s home)

The YouTube Stack Widget also sucks because, again, no control over what it’s displaying.

Older apps and widgets are still a bit flaky, despite Android 3.0 being backwards compatible, some apps do bad things that don’t show up until you’re running multi-core.  There also may be bugs in Dalvik, so we’ll see how this fleshes out in the months to come.

Command Line Goodness

And just a bit of command line output goodness so anyone whose curious can see exactly what the thing is running and what hardware/modules get active in this non-4G Xoom.

Full dmesg output

<6>[    0.000000] Initializing cgroup subsys cpu
<5>[    0.000000] Linux version 2.6.36.3-g2a65edc (android-build@apa28.mtv.corp.google.com) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Mon Feb 7 15:24:33 PST 2011
<4>[    0.000000] CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c53c7f
<4>[    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
<4>[    0.000000] Machine: stingray
<4>[    0.000000] Ignoring unrecognised tag 0x41000810
<6>[    0.000000] powerup reason=0x00000080
<4>[    0.000000] WiFi MAC Addr [4] = 0x<snip>
<4>[    0.000000]  40 fc 89 2f 5e 26
<6>[    0.000000] Found tegra_fbmem: 007d0000@1e018000
<6>[    0.000000] Reserved 1ff00000@00100000 for ram console
<6>[    0.000000] Tegra reserved memory:
<6>[    0.000000] LP0:                    1e7f1020 - 1e7f301f
<6>[    0.000000] Bootloader framebuffer: 1e018000 - 1e7e7fff
<6>[    0.000000] Framebuffer:            2e800000 - 2effffff
<6>[    0.000000] 2nd Framebuffer:         2f000000 - 2fffffff
<6>[    0.000000] Carveout:               30000000 - 3fffffff
<6>[    0.000000] HACK: Old framebuffer:  1e018000 - 1e7e7fff
<4>[    0.000000] Memory policy: ECC disabled, Data cache writealloc
<7>[    0.000000] On node 0 totalpages: 189952
<7>[    0.000000] free_area_init_node: node 0, pgdat c056b2a0, node_mem_map c063a000
<7>[    0.000000]   Normal zone: 1536 pages used for memmap
<7>[    0.000000]   Normal zone: 0 pages reserved
<7>[    0.000000]   Normal zone: 188416 pages, LIFO batch:31
<4>[    0.000000]   HighMem zone: 512 pages exceeds realsize 0
<6>[    0.000000] PERCPU: Embedded 8 pages/cpu @c0e42000 s8512 r8192 d16064 u65536
<6>[    0.000000] pcpu-alloc: s8512 r8192 d16064 u65536 alloc=16*4096
<6>[    0.000000] pcpu-alloc: [0] 0 [0] 1
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 188416
<5>[    0.000000] Kernel command line: mem=1024M@0M tegra_fbmem=8192000@0x1e018000 video=tegrafb ramconsole=1M@511M console=ttyS0,115200n8 usbcore.old_scheme_first=1 tegraboot=sdmmc gpt gpt_sector=0x03b9dfff mot_prod=1 androidboot.serialno=<snip> hw_rev=p3 lp0_vec=8192@0x1e7f1020 androidboot.bootloader=1035 androidboot.baseband=N_02.0F.00R lcd_manfid=AUO mem_vid=0x303 mem_pid=0x5454
<6>[    0.000000] usb_serial_num=<snip>
<6>[    0.000000] hw_rev=0x83000000
<6>[    0.000000] lcd_manfid=AUO
<6>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Memory: 510MB 232MB = 742MB total
<5>[    0.000000] Memory: 736196k/736196k available, 312380k reserved, 0K highmem
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
<5>[    0.000000]     DMA     : 0xff000000 - 0xffe00000   (  14 MB)
<5>[    0.000000]     vmalloc : 0xf0800000 - 0xf8000000   ( 120 MB)
<5>[    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
<5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
<5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
<5>[    0.000000]       .init : 0xc0008000 - 0xc0034000   ( 176 kB)
<5>[    0.000000]       .text : 0xc0034000 - 0xc0501000   (4916 kB)
<5>[    0.000000]       .data : 0xc0528000 - 0xc056bda0   ( 272 kB)
<6>[    0.000000] Hierarchical RCU implementation.
<6>[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
<6>[    0.000000]     RCU-based detection of stalled CPUs is disabled.
<6>[    0.000000]     Verbose stalled-CPUs detection is disabled.
<6>[    0.000000] NR_IRQS:448
<6>[   17.693756] Calibrating delay loop... 1992.29 BogoMIPS (lpj=9961472)
<6>[   17.963399] pid_max: default: 32768 minimum: 301
<4>[   17.964031] Mount-cache hash table entries: 512
<6>[   17.964942] Initializing cgroup subsys debug
<6>[   17.964959] Initializing cgroup subsys cpuacct
<6>[   17.964982] Initializing cgroup subsys freezer
<6>[   17.965080] CPU: Testing write buffer coherency: ok
<6>[   17.965377] Calibrating local timer... 249.86MHz, setting to 2.50MHz.
<4>[   18.063626] CPU1: Booted secondary processor
<6>[   18.343470] Brought up 2 CPUs
<6>[   18.343486] SMP: Total of 2 processors activated (3991.14 BogoMIPS).
<6>[   18.351416] regulator: core version 0.5
<6>[   18.351840] NET: Registered protocol family 16
<6>[   18.352853] host1x bus init
<6>[   18.353781] Tegra Revision: A03 prime SKU: 8 CPU Process: 0 Core Process: 0
<6>[   18.355988] stingray_init_emc: Elpida memory found
<6>[   18.360723] console [ttyFIQ0] enabled
<6>[   18.360927] Registered FIQ tty driver ee087d80
<6>[   18.360944] CPCAP: delaying cpcap_audio probe
<6>[   18.362474] ram_console: got buffer at 1ff00000, size 100000
<6>[   18.362636] ram_console: uncorrectable error in header
<6>[   18.362645] ram_console: no valid data in buffer (sig = 0xfff7ffd7)
<6>[   18.370687] console [ram-1] enabled
<6>[   18.372353] CPCAP: delaying cpcap_validity probe
<6>[   18.372443] CPCAP: delaying cpcap_led_driver probe
<6>[   18.372599] CPCAP: delaying cpcap_led_driver probe
<6>[   18.372686] CPCAP: delaying cpcap_3mm5 probe
<6>[   18.372843] CPCAP: delaying cpcap_whisper probe
<3>[   18.373560] hdmi: couldn't get regulator vcsi
<6>[   18.836057] initialize the ov5650 sensor
<6>[   18.836519] initialize the soc2030 sensor
<6>[   18.844593] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
<6>[   18.844953] tegra_arb_init: initialized
<4>[   18.845165] tegra_iovmm_register: added iovmm-gart
<4>[   18.857791] bio: create slab <bio-0> at 0
<7>[   18.858654] machine_constraints_voltage: override 'stingray_panel_reg' min_uV, 1 -> 5000000
<7>[   18.858819] machine_constraints_voltage: override 'stingray_panel_reg' max_uV, 2147483647 -> 5000000
<6>[   18.858910] regulator: stingray_panel_reg: 5000 mV
<7>[   18.859087] reg-fixed-voltage reg-fixed-voltage.0: stingray_panel_reg supplying 5000000uV
<5>[   18.860701] SCSI subsystem initialized
<6>[   18.861010] usbcore: registered new interface driver usbfs
<6>[   18.861267] usbcore: registered new interface driver hub
<6>[   18.861588] usbcore: registered new device driver usb
<6>[   18.864326] max8649 3-0060: Detected MAX8952 (ID: 0x201a)
<6>[   18.865534] regulator: max8649: 770 <--> 1100 mV at 1000 mV
<6>[   18.865672] max8649 3-0060: Max8649 regulator device is detected.
<6>[   18.867585] Bluetooth: Core ver 2.15
<6>[   18.867774] NET: Registered protocol family 31
<6>[   18.867933] Bluetooth: HCI device and connection manager initialized
<6>[   18.868024] Bluetooth: HCI socket layer initialized
<6>[   18.868444] Switching to clocksource timer_us
<6>[   18.869268] tegra-nvmap tegra-nvmap: created carveout iram (256KiB)
<6>[   18.869469] tegra-nvmap tegra-nvmap: created carveout generic-0 (262144KiB)
<6>[   18.871476] NET: Registered protocol family 2
<6>[   18.871750] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[   18.872563] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>[   18.874284] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
<6>[   18.875165] TCP: Hash tables configured (established 131072 bind 65536)
<6>[   18.875322] TCP reno registered
<6>[   18.875411] UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>[   18.875595] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>[   18.875955] NET: Registered protocol family 1
<6>[   18.877034] Unpacking initramfs...
<6>[   18.888343] Freeing initrd memory: 140K
<6>[   18.888648] PMU: registered new PMU device of type 0
<6>[   18.888926] tegra_audio_probe
<6>[   18.889065] tegra_audio_probe: i2s_clk rate 24000000
<6>[   18.889747] setup_dma
<6>[   18.889960] tegra_audio_probe
<6>[   18.890094] tegra_audio_probe: i2s_clk rate 2000000
<6>[   18.891094] setup_dma
<6>[   18.891412] tegra_spdif_probe
<6>[   18.891839] spdif_set_sample_rate: spdif_clk rate 5644800
<6>[   18.892324] setup_dma
<6>[   18.893683] usbnet init
<6>[   18.916775] ashmem: initialized
<6>[   18.918317] fuse init (API version 7.15)
<6>[   18.919705] io scheduler noop registered (default)
<6>[   18.924073] tegra_grhost tegra_grhost: initialized
<6>[   18.924268] host1x: tegradc tegradc
<6>[   18.924793] tegradc tegradc.0: probed
<6>[   18.925581] tegradc tegradc.0: probed
<6>[   18.937303] host1x: tegradc tegradc
<6>[   18.937968] tegradc tegradc.1: probed
<6>[   18.938908] tegradc tegradc.1: probed
<6>[   18.939455] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>[   18.940553] tegra_uart.0: ttyHS0 at I/O 0x0 (irq = 68) is a unknown
<6>[   18.940807] Registered UART port ttyHS0
<6>[   18.940930] tegra_uart.2: ttyHS2 at I/O 0x0 (irq = 78) is a unknown
<6>[   18.941227] Registered UART port ttyHS2
<6>[   18.941350] tegra_uart.3: ttyHS3 at I/O 0x0 (irq = 122) is a unknown
<6>[   18.941674] Registered UART port ttyHS3
<6>[   18.941796] tegra_uart.4: ttyHS4 at I/O 0x0 (irq = 123) is a unknown
<6>[   18.942105] Registered UART port ttyHS4
<6>[   18.942270] Initialized tegra uart driver
<6>[   18.946234] loop: module loaded
<6>[   18.946370] Android kernel panic handler initialized (bind=crashdata)
<6>[   18.946459] AK8975 compass driver: init
<3>[   18.946673] akm8975 3-000c: unable to get regulator 3-000c
<6>[   18.947059] input: compass as /devices/virtual/input/input0
<6>[   18.947571] kxtf9 accelerometer driver
<3>[   18.947791] kxtf9 3-000f: unable to get regulator
<6>[   19.050024] input: accelerometer as /devices/virtual/input/input1
<6>[   19.050525] kxtf9 3-000f: kxtf9 probed
<6>[   19.050831] cap_prox_hw_init: HW init
<6>[   19.260414] cap_prox_probe: msg->status 0x20
<6>[   19.260865] cap_prox_probe: Request IRQ = 395
<6>[   19.261223] cap-prox 3-0012: cap-prox probed
<6>[   19.261869] input: max9635_als as /devices/virtual/input/input2
<6>[   19.263790] L3G4200D gyroscope driver
<3>[   19.263984] l3g4200d_probe:Enter
<3>[   19.264077] l3g4200d 2-0068: unable to get regulator
<6>[   19.264390] input: gyroscope as /devices/virtual/input/input3
<6>[   19.264683] l3g4200d_probe:Gyro probed
<7>[   19.265100] mdm6600_ctrl_init
<6>[   19.265227] mdm6600_ctrl mdm6600_ctrl: mdm_ctrl_probe
<6>[   19.267058] mdm6600_ctrl: modem status: undefined -> awake [power on]
<6>[   19.267429] BMP085 barometer driver
<3>[   19.268460] bmp085 0-0077: unable to get regulator
<6>[   19.268830] input: barometer as /devices/virtual/input/input4
<6>[   19.271716] ts27010 mux registered
<6>[   19.279302] regulator: sw2: 1000 <--> 1200 mV at 1200 mV
<6>[   19.281342] regulator: sw4: 1000 <--> 1200 mV at 1200 mV
<6>[   19.281797] regulator: sw5: 5050 mV
<6>[   19.282705] regulator: vcam: 2900 mV
<6>[   19.284728] regulator: vcsi: 1200 mV
<6>[   19.285599] regulator: vdac: 1800 mV
<6>[   19.287598] regulator: vdig: 1875 mV
<6>[   19.288026] regulator: vfuse: 1500 <--> 3150 mV
<6>[   19.289644] regulator: vhvio: 2775 mV
<6>[   19.291626] regulator: vsdio: 3000 mV
<6>[   19.292764] regulator: vpll: 1800 mV
<6>[   19.293192] regulator: vrf1: 2500 <--> 2775 mV
<6>[   19.293577] regulator: vrf2: 2775 mV
<6>[   19.294071] regulator: vrfref: 2500 <--> 2775 mV
<6>[   19.295587] regulator: vwlan1: 1800 <--> 1900 mV at 1800 mV
<6>[   19.297561] regulator: vwlan2: 3300 mV
<6>[   19.298074] regulator: vsim: 1800 <--> 2900 mV
<6>[   19.298513] regulator: vsimcard: 1800 <--> 2900 mV
<6>[   19.299052] regulator: vvib: 1300 <--> 3000 mV
<6>[   19.299513] regulator: vusb: 3300 mV
<6>[   19.301075] regulator: vaudio: 2775 mV normal standby
<6>[   19.302018] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x0018
<6>[   19.314410] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x0038
<6>[   19.326763] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x0058
<6>[   19.339066] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x0078
<6>[   19.351420] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x0098
<6>[   19.363750] cpcap_uc cpcap_uc: Loading 4 word(s) at 0x00b8
<6>[   19.370129] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x0120
<6>[   19.382427] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x0140
<6>[   19.394787] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x0160
<6>[   19.407087] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x0180
<6>[   19.419449] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x01a0
<6>[   19.431744] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x01c0
<6>[   19.444106] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x01e0
<6>[   19.456433] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x0200
<6>[   19.468799] cpcap_uc cpcap_uc: Loading 2 word(s) at 0x0220
<6>[   19.473616] cpcap_uc cpcap_uc: Loading 5 word(s) at 0x0224
<6>[   19.479994] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x0231
<6>[   19.492294] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x0251
<6>[   19.504651] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x0271
<6>[   19.516952] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x0291
<6>[   19.529312] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x02b1
<6>[   19.541609] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x02d1
<6>[   19.553967] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x02f1
<6>[   19.566266] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x0311
<6>[   19.578630] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x0331
<6>[   19.590925] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x0351
<6>[   19.603285] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x0371
<6>[   19.615585] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x0391
<6>[   19.627942] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x03b1
<6>[   19.640241] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x03d1
<6>[   19.652603] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x03f1
<6>[   19.664900] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x0411
<6>[   19.677261] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x0431
<6>[   19.689539] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x0451
<6>[   19.701761] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x0471
<6>[   19.713999] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x0491
<6>[   19.726328] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x04b1
<6>[   19.738583] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x04d1
<6>[   19.750894] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x04f1
<6>[   19.763163] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x0511
<6>[   19.775430] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x0531
<6>[   19.787759] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x0551
<6>[   19.800030] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x0571
<6>[   19.812358] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x0591
<6>[   19.824627] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x05b1
<6>[   19.836955] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x05d1
<6>[   19.849236] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x05f1
<6>[   19.861552] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x0611
<6>[   19.873790] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x0631
<6>[   19.886116] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x0651
<6>[   19.898388] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x0671
<6>[   19.910716] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x0691
<6>[   19.922954] cpcap_uc cpcap_uc: Loading 16 word(s) at 0x06b1
<6>[   19.935284] cpcap_uc cpcap_uc: Loading 5 word(s) at 0x06d1
<6>[   19.946268] cpcap_uc cpcap_uc: Loaded HWCFG data: 0
<6>[   19.946507] cpcap_uc cpcap_uc: Started macro 4: 0
<6>[   19.959266] input: cpcap-key as /devices/virtual/input/input5
<6>[   19.959430] cpcap_key cpcap_key: CPCAP key device probed
<6>[   19.959653] cpcap spi1.0: Probing CPCAP device cpcap_audio
<6>[   19.961508] cpcap spi1.0: Probing CPCAP device cpcap_validity
<6>[   19.961916] cpcap_validity cpcap_validity: Started macro 14: 0
<6>[   19.962234] cpcap_validity cpcap_validity: Started macro 15: 0
<6>[   19.962328] cpcap spi1.0: Probing CPCAP device cpcap_led_driver
<6>[   19.962626] cpcap spi1.0: Probing CPCAP device cpcap_led_driver
<6>[   19.962846] cpcap spi1.0: Probing CPCAP device cpcap_3mm5
<3>[   19.963285] regulator_check_voltage: operation not allowed for vaudio
<6>[   19.964457] cpcap spi1.0: Headset key event: old=0, new=0
<6>[   19.964697] cpcap spi1.0: New headset state: 0
<6>[   19.964790] cpcap spi1.0: Probing CPCAP device cpcap_whisper
<6>[   19.965540] PPP generic driver version 2.4.2
<6>[   19.965893] PPP Deflate Compression module registered
<6>[   19.965982] PPP BSD Compression module registered
<6>[   19.966819] PPP MPPE Compression module registered
<6>[   19.966912] NET: Registered protocol family 24
<6>[   19.967819] usbcore: registered new interface driver asix
<6>[   19.967989] usbcore: registered new interface driver cdc_ether
<6>[   19.968302] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[   20.008697] tegra-ehci tegra-ehci.1: Tegra EHCI Host Controller
<6>[   20.008968] tegra-ehci tegra-ehci.1: new USB bus registered, assigned bus number 1
<6>[   20.038600] tegra-ehci tegra-ehci.1: irq 53, io mem 0xc5004000
<6>[   20.058582] tegra-ehci tegra-ehci.1: USB 2.0 started, EHCI 1.00
<6>[   20.058843] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[   20.058933] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   20.059089] usb usb1: Product: Tegra EHCI Host Controller
<6>[   20.059177] usb usb1: Manufacturer: Linux 2.6.36.3-g2a65edc ehci_hcd
<6>[   20.059333] usb usb1: SerialNumber: tegra-ehci.1
<6>[   20.059968] hub 1-0:1.0: USB hub found
<6>[   20.060155] hub 1-0:1.0: 1 port detected
<6>[   20.063233] tegra-ehci tegra-ehci.2: Tegra EHCI Host Controller
<6>[   20.063358] tegra-ehci tegra-ehci.2: new USB bus registered, assigned bus number 2
<6>[   20.088604] tegra-ehci tegra-ehci.2: irq 129, io mem 0xc5008000
<6>[   20.108582] tegra-ehci tegra-ehci.2: USB 2.0 started, EHCI 1.00
<6>[   20.108765] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>[   20.108925] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   20.109014] usb usb2: Product: Tegra EHCI Host Controller
<6>[   20.109173] usb usb2: Manufacturer: Linux 2.6.36.3-g2a65edc ehci_hcd
<6>[   20.109260] usb usb2: SerialNumber: tegra-ehci.2
<6>[   20.109916] hub 2-0:1.0: USB hub found
<6>[   20.110024] hub 2-0:1.0: 1 port detected
<6>[   20.110653] usbcore: registered new interface driver cdc_acm
<6>[   20.110813] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
<6>[   20.110973] Initializing USB Mass Storage driver...
<6>[   20.111215] usbcore: registered new interface driver usb-storage
<6>[   20.111374] USB Mass Storage support registered.
<6>[   20.111680] usbcore: registered new interface driver usbserial
<6>[   20.111839] usbserial: USB Serial Driver core
<6>[   20.112043] USB Serial support registered for MDM 6600 modem usb-serial driver
<6>[   20.112314] usbcore: registered new interface driver mdm6600
<6>[   20.112562] USB Serial support registered for moto-flashmdm
<6>[   20.112800] usbcore: registered new interface driver moto-flashmdm
<6>[   20.112890] NVidia Tegra High-Speed USB SOC Device Controller driver (Apr 20, 2007)
<6>[   20.118359] android init
<6>[   20.118510] android_probe pdata: c0547da8
<6>[   20.118700] android_bind
<7>[   20.118858] android_bind_config
<4>[   20.118943] Gadget Android: controller 'fsl-tegra-udc' not recognized
<6>[   20.119275] android_usb gadget: android_usb ready
<6>[   20.119365] fsl-tegra-udc: bind to driver android_usb
<6>[   20.119528] f_adb init
<6>[   20.119683] android_register_function adb
<6>[   20.119768] f_mtp init
<6>[   20.119852] android_register_function mtp
<6>[   20.119936] f_rndis init
<6>[   20.120208] android_register_function rndis
<6>[   20.120299] rndis_function_bind_config MAC: <snip>
<4>[   20.120495] android_usb gadget: using random self ethernet address
<4>[   20.120590] android_usb gadget: using random host ethernet address
<6>[   20.121150] usb0: MAC <snip>
<6>[   20.121239] usb0: HOST MAC <snip>
<6>[   20.121481] mtp_bind_config
<6>[   20.123148] adb_bind_config
<6>[   20.124910] qtouch_ts_probe: xpos_msb 4 xpos_lsb 4 ypos_msb 4 ypos_lsb 0
<6>[   20.125003] qtouch_force_reset: Forcing HW reset
<6>[   20.409109] qtouch_process_info_block: Build version is 0x10
<6>[   20.409202] qtouch_process_info_block: Num obj: 18 addr: 7
<6>[   20.409360] qtouch_process_info_block: Reading addr: 7
<6>[   20.409970] qtouch_process_info_block: Object 37 @ 0x0076 (130) insts 1 rep_ids 0
<6>[   20.410129] qtouch_process_info_block: Reading addr: 13
<6>[   20.410715] qtouch_process_info_block: Object 44 @ 0x00f8 (1) insts 1 rep_ids 0
<6>[   20.410874] qtouch_process_info_block: Reading addr: 19
<6>[   20.411531] qtouch_process_info_block: Object 5 @ 0x00f9 (9) insts 1 rep_ids 0
<6>[   20.411621] qtouch_process_info_block: Reading addr: 25
<6>[   20.412277] qtouch_process_info_block: Object 6 @ 0x0102 (6) insts 1 rep_ids 1
<6>[   20.412364] qtouch_process_info_block: Reading addr: 31
<6>[   20.413023] qtouch_process_info_block: Object 38 @ 0x0108 (64) insts 1 rep_ids 0
<6>[   20.413111] qtouch_process_info_block: Reading addr: 37
<6>[   20.413769] qtouch_process_info_block: Object 7 @ 0x0148 (3) insts 1 rep_ids 0
<6>[   20.413857] qtouch_process_info_block: Reading addr: 43
<6>[   20.414514] qtouch_process_info_block: Object 8 @ 0x014b (10) insts 1 rep_ids 0
<6>[   20.414673] qtouch_process_info_block: Reading addr: 49
<6>[   20.415260] qtouch_process_info_block: Object 9 @ 0x0155 (34) insts 1 rep_ids 16
<6>[   20.415418] qtouch_process_info_block: Reading addr: 55
<6>[   20.416006] qtouch_process_info_block: Object 15 @ 0x0177 (11) insts 2 rep_ids 1
<6>[   20.416163] qtouch_process_info_block: Reading addr: 61
<6>[   20.416592] qtouch_process_info_block: Object 18 @ 0x018d (2) insts 1 rep_ids 0
<6>[   20.416750] qtouch_process_info_block: Reading addr: 67
<6>[   20.417179] qtouch_process_info_block: Object 22 @ 0x018f (17) insts 1 rep_ids 1
<6>[   20.417337] qtouch_process_info_block: Reading addr: 73
<6>[   20.417837] qtouch_process_info_block: Object 24 @ 0x01a0 (19) insts 1 rep_ids 4
<6>[   20.417927] qtouch_process_info_block: Reading addr: 79
<6>[   20.418427] qtouch_process_info_block: Object 25 @ 0x01b3 (14) insts 1 rep_ids 1
<6>[   20.418515] qtouch_process_info_block: Reading addr: 85
<6>[   20.419029] qtouch_process_info_block: Object 27 @ 0x01c1 (7) insts 1 rep_ids 1
<6>[   20.419117] qtouch_process_info_block: Reading addr: 91
<6>[   20.419618] qtouch_process_info_block: Object 28 @ 0x01c8 (6) insts 1 rep_ids 1
<6>[   20.419774] qtouch_process_info_block: Reading addr: 97
<6>[   20.420202] qtouch_process_info_block: Object 40 @ 0x01ce (5) insts 1 rep_ids 0
<6>[   20.420358] qtouch_process_info_block: Reading addr: 103
<6>[   20.420789] qtouch_process_info_block: Object 41 @ 0x01d3 (7) insts 1 rep_ids 0
<6>[   20.420947] qtouch_process_info_block: Reading addr: 109
<6>[   20.421377] qtouch_process_info_block: Object 43 @ 0x01da (6) insts 1 rep_ids 0
<6>[   20.421824] qtouch_process_info_block: qtouch-obp-ts found.
<6>[   20.421829]   family 0xa0, variant 0x0, ver 0x10, build 0xff
<6>[   20.421833]   matrix 33x42, 18 objects, info blk chksum 0x203301
<6>[   20.422149] qtouch_ts_probe: FW version is 0x10 Build 0xFF
<6>[   20.422305] qtouch_ts_probe: Chip type matched
<6>[   20.422390] qtouch_ts_probe: Reflash not needed
<6>[   20.422910] input: qtouch-touchscreen as /devices/virtual/input/input6
<6>[   20.423296] qtouch_ts_probe: request_irq [362] success.
<6>[   20.423493] do_cmd_proc_msg:EEPROM checksum matches
<6>[   20.423579] do_cmd_proc_msg: Reset done.
<6>[   20.423664] do_cmd_proc_msg: Self-calibration started.
<3>[   20.424091] gpiomatrix: set_irq_wake failed for input 136, irq 328
<3>[   20.424264] gpiomatrix: set_irq_wake failed for input 137, irq 329
<6>[   20.424423] GPIO Matrix Keypad Driver: Start keypad matrix for stingray-keypad in interrupt mode
<6>[   20.424607] GPIO Input Driver: Start gpio inputs for stingray-keypad in interrupt mode
<6>[   20.424934] input: stingray-keypad as /devices/virtual/input/input7
<6>[   20.425658] using input dev cpcap-key for key reset
<6>[   20.425759] using input dev stingray-keypad for key reset
<6>[   20.425953] using input dev cpcap-key for key reset
<6>[   20.426823] using rtc device, cpcap_rtc, for alarms
<6>[   20.426984] cpcap_rtc cpcap_rtc: rtc core: registered cpcap_rtc as rtc0
<6>[   20.427587] i2c /dev entries driver
<6>[   20.428557] Linux video capture interface: v2.00
<6>[   20.428597] usb 2-1: new high speed USB device using tegra-ehci and address 2
<6>[   20.429070] trpc_sema_init: registered misc dev 10:32
<6>[   20.429296] trpc_node_register: Adding 'local' to node list
<6>[   20.431268] trpc_node_register: Adding 'avp-remote' to node list
<6>[   20.431604] tegra_avp_probe: driver registered, kernel 30100000(f0c00000), msg area 2d9d0000/2d9d0110
<6>[   20.431898] tegra_camera: probe
<6>[   20.432257] ov5650 sensor driver loading
<6>[   20.432449] ov5650: probing sensor.
<6>[   20.432793] soc2030: probing sensor.
<6>[   20.433109] dw9714l sensor driver loading
<6>[   20.433296] dw9714l: probing sensor.
<6>[   20.434770] Driver for 1-wire Dallas network protocol.
<6>[   20.435138] Driver for Tegra SoC 1-wire controller
<6>[   20.436176] bq24617 bq24617: Using STAT and DETECT for detection.
<6>[   20.436973] device-mapper: uevent: version 1.0.3
<6>[   20.437495] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
<6>[   20.437633] Bluetooth: HCI UART driver ver 2.2
<6>[   20.437722] Bluetooth: HCI H4 protocol initialized
<6>[   20.437808] Bluetooth: HCILL protocol initialized
<6>[   20.438624] cpuidle: using governor ladder
<6>[   20.439309] cpuidle: using governor menu
<6>[   20.439501] sdhci: Secure Digital Host Controller Interface driver
<6>[   20.439667] sdhci: Copyright(c) Pierre Ossman
<4>[   20.439934] mmc0: Invalid maximum block size, assuming 512 bytes
<6>[   20.440122] mmc0: no vmmc regulator found
<7>[   20.440417] Registered led device: mmc0::
<6>[   20.440763] mmc0: SDHCI controller on tegra [sdhci-tegra.1] using ADMA
<6>[   20.440856] sdhci1: initialized irq 47 ioaddr fe600200
<4>[   20.441114] mmc1: Invalid maximum block size, assuming 512 bytes
<6>[   20.441228] mmc1: no vmmc regulator found
<7>[   20.441549] Registered led device: mmc1::
<6>[   20.441794] mmc1: SDHCI controller on tegra [sdhci-tegra.3] using ADMA
<6>[   20.441959] sdhci3: initialized irq 63 ioaddr fe600600
<7>[   20.442565] Registered led device: notification-led
<7>[   20.442854] Registered led device: privacy-led
<7>[   20.444415] Registered led device: lcd-backlight
<7>[   20.446334] Registered led device: flash
<7>[   20.446564] Registered led device: torch
<6>[   20.447555] tegra-aes tegra-aes: registered
<6>[   20.451529] usbcore: registered new interface driver usbhid
<6>[   20.451773] usbhid: USB HID core driver
<6>[   20.452349] logger: created 64K log 'log_main'
<6>[   20.452597] logger: created 256K log 'log_events'
<6>[   20.452906] logger: created 64K log 'log_radio'
<6>[   20.453127] logger: created 64K log 'log_system'
<6>[   20.453686] oprofile: using arm/armv7-ca9
<6>[   20.453869] GACT probability NOT on
<6>[   20.453961] Mirror/redirect action on
<6>[   20.454116] u32 classifier
<6>[   20.454197]     Actions configured
<6>[   20.454283] Netfilter messages via NETLINK v0.30.
<6>[   20.454501] nf_conntrack version 0.5.0 (11505 buckets, 46020 max)
<6>[   20.454982] ctnetlink v0.93: registering with nfnetlink.
<6>[   20.458199] xt_time: kernel timezone is -0000
<6>[   20.458630] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[   20.458977] arp_tables: (C) 2002 David S. Miller
<6>[   20.459237] TCP cubic registered
<6>[   20.459905] NET: Registered protocol family 10
<6>[   20.461033] lo: Disabled Privacy Extensions
<6>[   20.461919] Mobile IPv6
<6>[   20.462010] IPv6 over IPv4 tunneling driver
<6>[   20.462756] sit0: Disabled Privacy Extensions
<6>[   20.463680] ip6tnl0: Disabled Privacy Extensions
<6>[   20.463964] NET: Registered protocol family 17
<6>[   20.464173] NET: Registered protocol family 15
<6>[   20.464486] Bluetooth: L2CAP ver 2.15
<6>[   20.464601] Bluetooth: L2CAP socket layer initialized
<6>[   20.464612] usb 2-1: New USB device found, idVendor=22b8, idProduct=2a70
<6>[   20.464623] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[   20.464631] usb 2-1: Product: Flash MZ600
<6>[   20.464637] usb 2-1: Manufacturer: Motorola, Incorporated
<6>[   20.465236] Bluetooth: SCO (Voice Link) ver 0.6
<6>[   20.465321] Bluetooth: SCO socket layer initialized
<6>[   20.465593] Bluetooth: RFCOMM TTY layer initialized
<6>[   20.465699] Bluetooth: RFCOMM socket layer initialized
<6>[   20.465856] Bluetooth: RFCOMM ver 1.11
<6>[   20.465941] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[   20.466026] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[   20.470698] mdm6600 2-1:1.0: MDM 6600 modem usb-serial driver converter detected
<4>[   20.471276] Disabling clock audio left on by bootloader
<4>[   20.471515] Disabling clock vfir left on by bootloader
<4>[   20.471635] Disabling clock pll_p_out4 left on by bootloader
<4>[   20.471806] Disabling clock pll_c_out1 left on by bootloader
<6>[   20.472013] Enabling Tegra protected aperture at 0x2e800000
<6>[   20.472056] usb 2-1: MDM 6600 modem usb-serial driver converter now attached to ttyUSB0
<6>[   20.472329] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
<6>[   20.472454] mdm6600 2-1:1.1: MDM 6600 modem usb-serial driver converter detected
<4>[   20.473493] regulator_init_complete: incomplete constraints, leaving vusb on
<6>[   20.473718] usb 2-1: MDM 6600 modem usb-serial driver converter now attached to ttyUSB1
<4>[   20.474014] regulator_init_complete: incomplete constraints, leaving vcsi on
<6>[   20.474199] mdm6600 2-1:1.2: MDM 6600 modem usb-serial driver converter detected
<3>[   20.475295] regulator_check_voltage: operation not allowed for vusb
<6>[   20.475762] usb 2-1: MDM 6600 modem usb-serial driver converter now attached to ttyUSB2
<6>[   20.475825] cpcap_whisper cpcap_whisper: CPCAP Whisper detection probed
<6>[   20.476367] mdm6600 2-1:1.3: MDM 6600 modem usb-serial driver converter detected
<6>[   20.476835] cpcap_rtc cpcap_rtc: setting system clock to 2011-03-30 16:55:50 UTC (1301504150)
<6>[   20.477398] Freeing init memory: 176K
<6>[   20.478177] usb 2-1: MDM 6600 modem usb-serial driver converter now attached to ttyUSB3
<6>[   20.478835] mdm6600 2-1:1.4: MDM 6600 modem usb-serial driver converter detected
<6>[   20.481572] usb 2-1: MDM 6600 modem usb-serial driver converter now attached to ttyUSB4
<6>[   20.647778] keychord: using input dev stingray-keypad for fevent
<6>[   20.698760] whisper_notify: accy=USB
<6>[   20.703030] cpcap-otg cpcap-otg: SUSPEND --> PERIPHERAL
<6>[   20.722880] mmc1: new high speed MMC card at address 0001
<6>[   20.723529] mmcblk0: mmc1:0001 MMC32G 29.8 GiB
<4>[   20.728076] Primary GPT is invalid, using alternate GPT.
<6>[   20.728266]  mmcblk0: p1 (ebb) p2 (pdsb) p3 (misc) p4 (logo.bin) p5 (kpanic) p6 (recovery) p7 (boot) p8 (system) p9 (cache) p10 (userdata)
<6>[   20.749357] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null)
<6>[   26.365164] EXT4-fs (mmcblk0p10): recovery complete
<6>[   26.372539] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null)
<4>[   26.415043] EXT4-fs (mmcblk0p9): warning: mounting fs with errors, running e2fsck is recommended
<6>[   26.418763] EXT4-fs (mmcblk0p9): recovery complete
<6>[   26.422202] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: (null)
<4>[   26.469363] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<6>[   26.585340] warning: `adbd' uses 32-bit capabilities (legacy support in use)
<6>[   26.585572] enabling adb
<6>[   26.598792] adb_open
<6>[   26.682814] gps_brcm4750_ioctl: Setting gps gpio reset pin: 0
<6>[   26.683000] stingray_gps_reset_gpio: setting GPS Reset GPIO to 0
<6>[   26.683267] gps_brcm4750_ioctl: Setting gps gpio standby pin to: 0
<6>[   26.683408] stingray_gps_standby_gpio: setting GPS standby GPIO to 0
<6>[   26.684760] gps_brcm4750_ioctl: Setting gps gpio reset pin: 1
<6>[   26.684906] stingray_gps_reset_gpio: setting GPS Reset GPIO to 1
<6>[   26.763575] gps_brcm4750_ioctl: Setting gps gpio standby pin to: 1
<6>[   26.763672] stingray_gps_standby_gpio: setting GPS standby GPIO to 1
<6>[   27.277577] tear_down_dma
<6>[   27.277737] setup_dma
<6>[   27.279997] tear_down_dma
<6>[   27.280159] setup_dma
<6>[   44.689354] gps_brcm4750_ioctl: Setting gps gpio standby pin to: 0
<6>[   44.689543] stingray_gps_standby_gpio: setting GPS standby GPIO to 0
<4>[   50.594319] wifi_set_power = 1
<4>[   51.003270] wifi_set_carddetect = 1
<4>[   51.004381]
<4>[   51.004385] Dongle Host Driver, version 4.218.248.20
<6>[   51.038448] request_suspend_state: wakeup (3->0) at 33339878001 (2011-03-30 16:56:21.050062001 UTC)
<4>[   51.051347] mmc0: queuing unknown CIS tuple 0x91 (3 bytes)
<6>[   51.051488] mmc0: new high speed SDIO card at address 0001
<4>[   51.056551] DHD: dongle ram size is set to 294912(orig 294912)
<4>[   51.170987] Firmware version = wl0: Jan 12 2011 13:48:56 version 4.218.248.20
<4>[   51.313321] wlan0: Broadcom Dongle Host Driver mac=<snip>
<4>[   54.186655] STA connect received 1
<6>[   54.883460] mtp_open
<6>[   55.870921] gps_brcm4750_ioctl: Setting gps gpio standby pin to: 1
<6>[   55.871024] stingray_gps_standby_gpio: setting GPS standby GPIO to 1
<3>[   65.188394] binder: release proc 600, transaction 8298, not freed
<6>[   70.719196] gps_brcm4750_ioctl: Setting gps gpio standby pin to: 0
<6>[   70.719302] stingray_gps_standby_gpio: setting GPS standby GPIO to 0
<6>[   91.509091] whisper_notify: accy=none
<6>[   91.510297] cpcap-otg cpcap-otg: PERIPHERAL --> SUSPEND
<6>[   94.760897] binder: 832:833 refcount change on invalid ref 20
<6>[   95.478897] binder: 832:833 refcount change on invalid ref 31
<6>[  100.968782] whisper_notify: accy=USB
<6>[  100.969131] cpcap-otg cpcap-otg: SUSPEND --> PERIPHERAL
<6>[  112.229274] mtp_release
<6>[  115.909260] whisper_notify: accy=none
<6>[  115.910877] cpcap-otg cpcap-otg: PERIPHERAL --> SUSPEND
<6>[  136.329252] whisper_notify: accy=USB
<6>[  136.330662] cpcap-otg cpcap-otg: SUSPEND --> PERIPHERAL
<6>[  136.662973] mtp_open
<6>[  136.824673] android_usb gadget: high speed config #1: android

cat /proc/cpuinfo (mmmm dual corey goodness – tho cpuinfo doesn’t show it – i also removed the serial number, just in case…)

Processor    : ARMv7 Processor rev 0 (v7l)
processor    : 0
BogoMIPS    : 1992.29

processor    : 1
BogoMIPS    : 1998.84

Features    : swp half thumb fastmult vfp edsp vfpv3 vfpv3d16
CPU implementer    : 0×41
CPU architecture: 7
CPU variant    : 0×1
CPU part    : 0xc09
CPU revision    : 0

Hardware    : stingray
Revision    : 8300
Serial        : <snip>
A lil bit of df (/mnt/sdcard appears to be aliased to the internal data storage in absence of an actual sd card via a fuse driver)

Filesystem             Size   Used   Free   Blksize
/dev                   359M    32K   359M   4096
/mnt/asec              359M     0K   359M   4096
/mnt/obb               359M     0K   359M   4096
/system                236M   193M    42M   4096
/data                   28G     1G    27G   4096
/cache                 166M     4M   162M   4096
/pds                     1M   106K     1M   2048
/mnt/sdcard             28G     1G    27G   4096

cat /proc/mounts

rootfs / rootfs ro,relatime 0 0
tmpfs /dev tmpfs rw,nosuid,relatime,mode=755 0 0
devpts /dev/pts devpts rw,relatime,mode=600 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,relatime 0 0
debugfs /sys/kernel/debug debugfs rw,relatime 0 0
none /acct cgroup rw,relatime,cpuacct 0 0
tmpfs /mnt/asec tmpfs rw,relatime,mode=755,gid=1000 0 0
tmpfs /mnt/obb tmpfs rw,relatime,mode=755,gid=1000 0 0
none /dev/cpuctl cgroup rw,relatime,cpu 0 0
/dev/block/platform/sdhci-tegra.3/by-name/system /system ext4 ro,relatime,barrier=1,data=ordered 0 0
/dev/block/platform/sdhci-tegra.3/by-name/userdata /data ext4 rw,nosuid,nodev,noatime,barrier=1,data=ordered 0 0
/dev/block/platform/sdhci-tegra.3/by-name/cache /cache ext4 rw,nosuid,nodev,noatime,barrier=1,data=ordered 0 0
/dev/block/platform/sdhci-tegra.3/by-name/pdsb /pds ext2 ro,relatime 0 0
/dev/fuse /mnt/sdcard fuse rw,nosuid,nodev,relatime,user_id=1023,group_id=1023,default_permissions,allow_other 0 0

Thats it!

The Internet is it’s OWN governing body.  Within that entity there are many other parts and pieces,  RIPE, ARIN, IETF, IANA, IAB, AfriNIC, APNIC, LACNIC, NANOG, the RFC Editor, the list goes on.  There are many entities that govern the internet, or at least aspects of it.  If the US Government makes it harder for any of those entities, or their constituents (Verizon, Verio, Google, Yahoo, NTT, Level3, 360 Communications) to participate in the larger entity of the internet, then they will leave, the US citizenship will suffer, as we already do.  Ridiculously expensive internet communications costs, lack of availability in some areas still for example.  It will be EXACTLY what happened with the US Manufacturing industry, it is actually already starting to happen.

The Internet is not some single unit under the thumb of the US Government, it is an entity, in all reality a governing body, a nation, in and of itself with constituents in each and every nation, each and every district, city, county, state.  If the US Government tries to restrict the constituents of the Internet that live, work, and/or do business within it’s geopolitical boundaries, then those entities WILL suffer, and many will go elsewhere.  The Internet is fundamentally different from manufacturing in that in order to exist we have to work together.  My network, those of my neighbors, and so on.  My servers, your web browser, everything.  It is the nature of the beast.  And it will not exist under the control of external entities.  It simply can’t.

Most, if not all, canned security tests come down to what is often called security theater.  Security relies on a chain, and in some ways in layers, but it’s much more like a chain.  And the weakest link will be the break.  Take, for instance, the TJ Maxx debacle.  PCI DSS (Payment Card Industry – Data Security Standards) or whatever Visa and the other credit card processors are calling it nowadays are supposed to prevent this sort of thing.  Anyone in the industry will tell you almost all of their tests are meaningless security theater.  They do almost nothing to actually protect data.  PCI DSS has even been accused of making security worse because it often creates a false sense of security, because you can only test for and look for KNOWN problems.  Security is a chain, and it is as weak as its weakest link.  PCI DSS and other similar tests can only ever adequately look at the very last link in the chain, or known weaknesses.

The tools, techniques, and ideas of physical security often do not translate to the digital world.  In physical security the attackers tools are crowbars, explosives, cutting tools, lockpicks, things like that.  They all require that they physically move to the area to be attacked.  In the digital world the tools are the bit and the byte.  Infinitely simpler, but also infinitely more complex.  A security scanner can only look around the outside of the building, and check for things it knows to be insecure.  What it can’t, and often does not do, is even bother to check a majority of the NORMAL routes of ingress and egress.  Having a web server is like having an 8 line highway into and out of your server.  ANYTHING can come or go over that, so protection at the border, is NEVER enough.  You have to look at how every part handles the data that comes in, and goes out.  And even then you’re likely to only be able to look for things that are known to be problems, novel attacks often make use of what looks like innocuous or non-threatening avenues of approach, at least, until they’re used against you.

It is, and really must be, the individual entities responsibility to actually ensure their security.  You can’t just drop a steel gate in front of the 8 lane highway either, they’ll find a way under or around it, or just bomb the whole damn thing into oblivion.  Obscuring or hiding security problems does NOT help in the Internet.  In order for others to be aware, and secure themselves, they have to be informed.  If you have no idea that that “pool of water” is actually highly acidic, or has a cloud of sulfur dioxide hanging around it, you might jump in, and then be dead, or at least badly injured.  Being informed is the only way.  You can certainly do things to help mitigate some risks, but in the end EDUCATION is the answer.  Organizations like SANS that teach real world security and concepts are the way to improve “cybersecurity” — not legislation.  The US Government would do far more for “cybersecurity” by spreadign around 500+million to the likes of SANS than it could EVER hope to accomplish by any forms of “kill switches”

The ONLY thing the “kill switch” like legislation and “cybersecurity” legislation does is create a political knob that WILL be abused, intentionally, or by ignorance.  Take for instance FreeDNS getting shut down because some pencil pushing retard doesn’t know what a server is, much less DNS.  Tens of thousands of innocents were hurt by that one.

Hell honestly, the governments should be answering to the Internet as an entity/government/nation, NOT the other way around.

Fast forward to 2010. It’s been long enough, I figure the AMD/ATI integration should’ve helped them out by now, right?  Buy a new machine with two ATI Radeon HD 5870′s. Capable of 850MHz GPU clock and a 1200MHz memory clock, before overclocking or tweaking. Right out of the box I get underscan on my HDMI connection. No worries I think, fire up ATI Catalyst Control Center (CCC) and turn it off, problem fixed. Really retarded that they do that at all, but whatever.

Cue reboot to do the obligatory windows update…WTF? Underscan again? OK maybe drivers got punked, reset it, yay. All is good. A day or so later, another reboot. ?!??! UNDERSCAN AGAIN!?!?! Go get latest Catalyst drivers. They don’ properly install so I have to uninstall them, run driver sweeper, and then try the install again. Back to underscan…reset…but now the underscan is clearly on on EVERY reboot. Resort to Googling. Apparently this bug has been around for a damn long time. And may even be that it keeps coming back. How about this ATI. Since almost NO HDMI compatible display device is going to desire underscan, JUST DISABLE IT BY DEFAULT!? No nVidia card I’ve had has had this issue.

So on top of this really painfully obvious underscan issue, the driver installer/uninstaller doesn’t work right.  Its so bad in fact that ATI’s own people often point customers to driver sweeper instead of FIXING the damn thing.  Installing new drivers is not remotely seamless like it should be.  Upgrades should always be pain free, download installer and run.  With ATI’s packages running the installer like that may or may not get you fully updated depending on the phase of the moon, color of your hair, and whether the geese have flown south for the winter or not.

Another irritating one. And one I’ve attached a GPU-Z screenshot for. With Adobe Flash 10.1, playing any flash accelerated video, IE from YouTube, will lock your Radeon HD 5870 to 400/900, no matter what. I fired up Kombustor and FurMark to prove it. Close the YouTube window and your clocks unlock to 850/1200. This is another bug that goes WAY WAY back after a bit of Googling.

Seriously ATI?

The attached image shows me first firing up a YouTube clip in FireFox.  The Video clock jumps to 400/900 and sticks…a little odd, especially if the video is paused but whatever…. Then I fire up MSI Kombustor (same as FurMark).  The GPU load jumps to 100% but the clocks stay locked at 400/900.  I close the YouTube clip, and the clocks then unlock and shoot up to 850/1200.  The Kombustor/FurMark frame rates reflect the hobbled video card clocks.  Nothing I do unlocks the clock from 400/900 as long as Flash is playing video.  This is with the latest Catalyst 10.9a (Hotfix) drivers.  I had to install these to get rid of the previously mentioned underscan idiocy.

Same behavior with Google Chrome and Microsoft Internet Explorer 8.  This is all running on Windows 7 Ultimate x64.

So in short, don’t get ATI. They can’t get their drivers right. You never know when a bug will come back, or when/IF they’ll fix performance critical bugs. I shouldn’t have to make certain to close each and every browser window to play a game, get max performance for a transcode, etc. Not on a machine with 4x 3.2GHz cores.  The experience here with this card follows similar bad experiences with the older card and software (I had underscan issues on that one too, and performance issues that may or may not have been similar, but I never looked into it too deeply).

You drop thousands of dollars for a high end gaming machine/workstation.  1/4 or more of that will be in the video cards, and this is what ATI delivers.  I’ve found articles on AMD/ATI’s own forum from users indicatign BOTH these issues go back to *at least* mid 2009, and probably earlier.  Why am I not blaming Flash?  Even if Flash is asking for video acceleration, or asking for a 400/900 clock, the ATI drivers should STILL adapt the clock to the GPU load.  If the GPU pegs out it should let the clock go.

Ahem…*cough* Now that that’s out of my system. I made a decision at the beginning of this month to move all of my hosting to an Amazon EC2 instance. While nowhere near ideal for web hosting and not really much cheaper than my current hosting arrangements, and quite frankly only cheaper as long as my bandwidth usage stays down! I decided to switch for a number of reasons. Part of those are the fact I honestly don’t want to deal with the hardware anymore if I can avoid it.  Tehy really really really NEED to get IPv6 support though…and that will be the deciding factor as to if I stay using EC2 or not.  Without IPv6 they’re garbage and I’ll go elsewhere and pay more, because I’ll have no choice, just to get IPv6 support.

The web sites will have about the same CPU and RAM as they had before, but may actually be somewhat faster because the storage should be faster. The (soon to be) old hosting setup I’d elected to build uses NFSv4 and the Linux automounter, an experiment that proved to me that Linux NFSv4 is NOT ready for prime time (even in my limited setup NFSv4 will occasionally go off into the woods and NEVER come back short of a reboot of the machine, this happens most often on the web server and once in a while to the mail server) the automounter has been stable but NFSv4 mounts are dog slow, with, or without encryption setup.

So if you notice any oddities this week that is most likely why.  I’ve already finished moving my @wgops.com email over to the new setup and it seems to be working fine.  This weekend I’m going to try to get dotblag.com moved over to the new setup.  If that goes well then I’ll get in touch with the few people I host and we’ll get them moved over to the new machine too.  This is actually a really small move, but I’m going between completely unmanaged hosting, to trying out a management UI/platform, DTC.  If things don’t go well with the dotblag.com move then I’ll have to scramble and figure out something else ASAP!  I can’t really afford to pay for both the old hosting and the new hosting.

Incidentally if you need reliable  Colo, VPS, or web hosting, especially if you’re running a dynamic PHP application powered site but don’t want to pay premiums for dedicated hosting, get in touch with Modwest.  I might be leaving them, but it’s not because there’s anything wrong with them!